Wouldn't it be really cool if you didn't have to buy vegetable seeds ever again? Well, you can, with a little bit of knowledge and practice. Seed saving for the crop next season is fun and very cheap, and the beauty of it is that you can begin to adapt plant varieties to become conditioned to your climate.
I have tried seed saving with mixed success, so in this post I will try and explain how I have achieved at least a few successes and what I have learned along the way. So far I have managed to save quite a few types of vegetables using a few different methods.
The first type of seed that I tried to save was purple podded peas. It was simple enough to decide which plant was the largest and had the biggest pods. So after I harvested the other plants, I left this one to dry out so that I could collect the seeds. If you are expecting lots of rain, it is probably best if you pull the plant when it is just going dry and hang it upside down out of the weather. Once the pods were dry, I took out the seeds and stored them in an airtight glass jar. I have been successfully growing purple podded peas using this method for 3 years now. Looking back, it is hard to believe that I only bought a $2.50 packet of 25 seeds in the first place and besides the seeds I have saved, we have had many pea feasts as well! This drying on the bush method is also good for all types of beans, and I have collected Daikon radish seeds in this manner as well.
For smaller, more delicate seeds, I have let the desired plant flower and set seed. Just before it begins to dry out, I put a brown paper bag over the seed head and tied it off with a rubber band. When the seed heads dry the seeds fall into the bag, and all you have to do is label and store them in a dry, cool place for next seasons planting. I have used this method with lettuce, silverbeet, rainbow chard, onions, leeks, radishes, carrots, parsnips, parsley and basil. All of these types of plants usually self pollinate so you will not have too many problems with cross pollination. These vegetables will stay 'true to type', that is, this generation of the plant you harvested seed from will be mostly the same as you will get in the next generation.
Another method of saving seed are by tuber. For example potatoes, sweet potato, Jerusalem artichoke and yacon to name a few. You harvest the best looking tubers and store them in a hessian bag in a dark, dry place for sowing in the next season.
Garlic is another of my favourites and easy to save for planting in the next season. Keep a few bulbs from your crop (the larger the better), and when it is time to plant garlic in your part of the world, simply pull apart the bulb and plant single large cloves, pointy end upwards about 20cm appart. A new bulb will grow around the clove and you will never be without garlic ever again! Use the smaller inner cloves for cooking as you will end up with very tiny bulbs of garlic at the end of the season.
Sometimes you don't even need seeds to grow another plant. You can take a cutting and stick it into some moist seed raising mix or some loamy soil and most of the time it will strike roots and continue to grow a clone of the parent plant. I have successfully propagated tomatoes, all types of mint, eggplants (aubergine), and capsicum (bell peppers) using this method. You can buy root hormone powder to enhance your success rate, however I find that most cuttings usually strike roots and I have about a 80-90% success rate.
Sweet corn or maize is another easy vegetable to save seeds from. Let the cob dry out on the plant and then remove the outer husk and then with a twisting motion with your hands around the cob, the seeds usually just fall off. I make sure that I have a large bowl or tea towel underneath to catch the kernels when I husk corn cobs. I then store them in a glass jar in a dark place until required. I have only saved popping corn using this method, but I dare say it would work with any type of corn. Remember that corn is pollinated by the wind and I read that to keep the strain pure you need at least 500 metres between varieties. Let hope your neighbour isn't growing corn at the same time!
Collecting seeds from the cucurbit family may look as easy as scooping the seeds out of a cucumber, pumpkin, squash or zucchini, and letting them dry on paper towel, however there are a few things you must know so that you get true to type seeds for next season. The cucurbit family readily cross pollinate when nearby, and each variety does not care where the pollen comes from as long it is from its own family. Each plant also has a male flower and a female flower. You can identify the female flower because it has a small swelling at the base which when pollinated becomes a fruit. The flowers only live for one or two days and open at down so that the bees can spread the pollen from male to female. One book I read recommends that you plant each variety of cucurbit at least 400 metres apart to stop cross pollination, but you can also hand pollinate to control the exchange of pollen. This is done by protecting the flowers from insects or wind whilst the female flower is receptive.
- Firstly select male and female flowers the evening before they are due to open. You can tell this because they will be rigid and have some yellow on the seams of the closed bud.
- Close each flower with a rubber band or some masking tape or wrap the entire flower in some pantyhose and tie it at the stem so no insects will be able to get at the flower at first light.
- In the morning cut the male flower off at the base of its stalk and take off the petals to expose the male part. Open the flower and rub the male part into the female part. You could use a few different male flowers from the same species to imitate the way a bee pollinates, but I have found that this was not necessary when I did it..
- After the pollen is well coated on the female part, shut or cover the female with pantyhose again until the flower withers.
- Make sure you put a tag around the stem of the plant so that as it grows bigger you know that it is a keeper. You could also write on the skin with a waterproof maker pen as I did. Tell everyone in your family not to pick it either or you may end up loosing your carefully hand pollinated treasure.
- Before harvesting the fruit, make sure it is a big as it can possibly be so that it will ensure that you have very plump seeds.
- Store the ripe fruit for a few weeks before opening and collecting the seeds. Dry and store in a brown paper bag in a dry, cool position.
Of all the seed saving methods, the simplest is what I call the 'volunteer' method. I usually find that as the weather warms up in spring, I get so many tomato seedlings growing in the beds that I had tomatoes planted in them in the year before. I just scoop out the seedling with a bit of soil still around the roots and then re-pot so that they grow a bit stronger before transplanting them into a different bed for crop rotation. It is a bit of a lucky dip, but if you use heirloom seeds each year or collect your own, then there is no reason you can't liberate these volunteers so that they provide you with a bumper harvest. Last year ever single tomato plant that I grew was a volunteer as the seeds I tried to grow got waterlogged in a downpour and I lost the lot. I had a massive crop of all different types of tomatoes.
Well that is about all I have achieved in my seed saving, but I am quite proud of the types of plants I have continued to save seeds from especially the cucurbits. It certainly has saved me a lot of money, and I feel that these plants are beginning to adapt to our dryer climate. Humans have been saving seeds for thousands of years, so why not give it a go. I am sure you will reap a bumper harvest from the seeds you collect!